REFECTOCIL LASH AND BROW TINT DYE / OXIDANT (DEVELOPER)

✧ 𝐑𝐄𝐀𝐃𝐘 𝐒𝐓𝐎𝐂𝐊 𝐊𝐋 ✧

✧ 𝐒𝐀𝐌𝐄 𝐃𝐀𝐘 𝐃𝐈𝐒𝐏𝐀𝐓𝐂𝐇 𝐅𝐎𝐑 𝐎𝐑𝐃𝐄𝐑 𝐁𝐄𝐅𝐎𝐑𝐄 𝟐𝐏𝐌 ✧

Please note that there might be shipment delay during public holiday

‼️ REFECTOCIL OXIDANT is sold separately ‼️
‼️ REFECTOCIL LASH AND BROW TINT/DYE and OXIDANT are sold separately ‼️

 REFECTOCIL TINT by RefectoCil (Direction of Use for R0)

Lightening of eyebrows up to 3 levels.  

Oxidant must be used to activate this product.

RefectoCil Bleaching paste No. 0 Blond lightens eyebrows by up to 3 levels:
- To match too prominent or dark eyebrows with dyed blond hair
- To achieve the desired natural colour (4N to 9N) as basis before tinting with RefectoCil No. 4 Chestnut and No. 4.1 Red

STEP 1: Preparation

• Cleanse the eyebrows effectively with our RefectoCil Micellar Eye Make-up Remover. Eyebrows must be clean, oil-free and dry.

STEP 2: Mix & Apply

• Mix 2 cm paste + 20-25 drops Oxidant 3% cream. Mix at least 2 minutes until the paste becomes creamy. If it is not creamy enough, add some drops of Oxidant cream.
• Afterwards apply to the eyebrows.

STEP 3: Application Time

• Application time: depending on the desired lightning effect: 5-20 minutes
  •  5 minutes: one shade lighter
  • 12 minutes: two shades lighter
  • 20 minutes: three shades lighter

STEP 4: Ready!

• Remove bleaching paste with RefectoCil Micellar Eye Make-up Remover.

REFECTOCIL TINT by RefectoCil (Direction of Use for R1,R1!, R2, R2!, R3, R3!, R4, R4!)

RefectoCil Tints come in a beautiful variety of colours.  They can be mixed together to create your perfect tint - just remember they are activated by the Oxidants (either cream or liquid depending on your preference)

 Instructions: 

STEP 1: Preparation

• Remove contact lenses.
• Clean the eye-area with the oil-free, lash strengthening RefectoCil Micellar Eye Make-up Remover.
• Use saline solution to remove residues and achieve optimum results.
• Use RefectoCil Silicone Pads or Skin Protection Cream and Eye protection papers according to instructions.

STEP 2: Mix & Apply

• Immediately before tinting mix 2cm of tint and 10 drops RefectoCil Oxidant liquid or 15-20 drops of RefectoCil Oxidant cream into a creamy paste.
• Oxidant is required for this product to work.
• Afterwards, apply to brows and lashes.

STEP 3: Application Time

• Lashes: 10 minutes.
• Brows: 5-10 minutes. The longer the application time the more intensive the result.

STEP 4: Ready!

• Remove by using cotton wool pads and water.

Tips and Tricks

• If RefectoCil Blonde Eyebrow Tint has been previously used, the application time is shortened by 1-5 minutes, with RefectoCil Eyelash Curl it’s shortened by 2 minutes.
• Allergy test: We recommend an allergy test (patch test) before the first application as well as after long periods without tinting.

OXIDANT (DEVELOPER) by RefectoCil

2 TYPES OF OXIDANTS (developer) AVAILABLE:

🔹 Oxidant Cream 3%

✓ RefectoCil Oxidant Developer Cream is for mixing with tints prior to application. Each bottle contains enough cream for around 150 applications. 

✓ RefectoCil Oxidant Developer Cream produces thicker mixture during application (Oxidant Cream and Oxidant Liquid carry the same result, just different mixture liquidity)

✓ Direction to Use: Mix 2cm of tint with 15-20 drops of oxidant cream prior to application.

✓ Ingredients: Aqua, Hydrogen Peroxide, Cetearyl Alcohol, Triethanolamine, Ceteareth-20, Phosphoric Acid, Sodium Cetearyl Sulfate

🔹 Oxidant Liquid 3%

✓ RefectoCil Oxidant Developer Liquid is for mixing with tints prior to application. Each bottle contains enough liquid for around 200 applications.

✓ RefectoCil Oxidant Developer Liquid produces flowing mixture during application (Oxidant Cream and Oxidant Liquid carry the same result, just different mixture liquidity)

✓ Direction to Use: Mix 2cm of tint with 10 drops of oxidant liquid prior to application.

✓ Ingredients: Aqua, Hydrogen Peroxide, Triethanolamine, Phosphoric Acid, C12-13 Pareth-9